AIS Transponder with NMEA 2000 to WiFi Server

NMEA 2000 Starter Kit

The perfect pack to receive AIS and to transmit your position as well as streaming wirelessly all your navigation data on navigation apps & software.

In this pack, you have the Class B+ 5W AIS Transponder AIT2500. It uses our latest Class B+ SOTDMA technology – this offers 2.5x transmit power of regular Class B plus a more frequent position update based on the speed of the vessel. Just like a commercial Class A transponder, SOTDMA technology also guarantees a transmission slot in areas of high AIS traffic.

The AIT2500 is complete with GPS (10m cable) and VHF antenna (20m cable). The VHF antenna is a 15cm VHF heliflex antenna, this is specifically tuned to AIS (162MHz) frequencies for optimal performance. AIT2500 has both NMEA 0183 and NMEA 2000 interfaces as well as a USB PC/MAC connection. There is also a 2nd NMEA output to provide a GPS feed for a DSC VHF radio. The AIT2500 can also be fitted with a silence switch to mute transmissions.

The NavLink2 is an easy to fit NMEA 2000 to WiFi server, with a design to allow NMEA 2000 navigation data available for apps on smartphones, tablets, iPads and PCs. Once installed, it creates a local WiFi network for devices to connect. All the navigation data on the NMEA 2000 network will be displayed on detailed electronic charting through compatible software & apps including NavLink, TimeZero, iAIS, iSailor, Seapilot and hundreds more. The tablet and PC/Mac become a full function navigation display.

The NavLink2 and AIS have an NMEA 2000 interface so the installation is very easy with our NMEA 2000 starter kit included in the pack. NMEA2000 uses a simple backbone (or sometimes called “trunk”) structure. This requires terminators at each end of the cabling where each device can be spurred off using a drop cable. The bus also requires power. Furthermore, the waterproof connectors throughout ensure maximum reliability and it makes for an easy plug ‘n play installation.